MSI MS-9272 Скачать руководство пользователя страница 62

Страница: 62 / 120

3-9

BIOS Setup

SATA RAID Enable

This feature allows users to enable or disable the RAID function for each
SATA hard disk drive.

Important

Legacy Mode:

* In this mode, system BIOS just assign the traditional 14 and 15

IRQs to use for HDD.

* Older OS

’

s that do not support switch to Native Mode (DOS, Win2K,

Win98/ME...) should set SATA and PATA to Legacy Mode.

* Maximum 4 ATA devices to connect.
* Combine mode and Non-Combine mode.

- Non-Combined Mode:

P-ATA devices only .
Maximum of 4 devices.

- Non-Combined Mode:

S-ATA devices only.
Maximum of 2 devices.

- Combined Mode:

S-ATA devices
P-ATA devices
Maximum of 2 devices each, total 4
devices at maximum.

Native Mode:

* In this mode, system BIOS will search all available IRQs to use for

HDD.

* New OS

’

s that support switch to Native Mode (WinXP, Windows .

NET Server) can set SATA and PATA to Native Mode.

* Maximum 6 ATA devices to connect (4 for P-ATA & 2 for S-ATA).

Содержание MS-9272

























































































































Результаты поиска

Содержание MS-9272

Отзывы:

MSI MS-9272, Руководство пользователя, Страница: 62 / 120

Результаты поиска

Содержание MS-9272

Отзывы: