MSI MS-9258, Руководство пользователя, Страница: 73 / 97

3-25
BIOS Setup
ECC Function
This setting enables/disables ECC (Error Correction Code) checking, a method
of checking the integrity of data in DRAM. ECC provides more elaborate error
detection than parity; ECC can detect multiple-bit errors and can locate and
correct single-bit errors.
M emory Remap Feature
The memory remapping feature allows for the segment of system memory that
was previously overwritten by the Peripheral Component Interconnect (PCI)
configuration space to be remapped above the 4 GB address line.
South Bridge Configuration
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system
that does not support or have any USB 2.0 driver installed, such as DOS and
SCO Unix.
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power
failure or interrupt occurred.
9258v1.0-3.p65 2007/11/13, 下午 03:47 25