MSI MS-9232, Руководство пользователя, Страница: 57 / 87

3-9
BIOS Setup
IDE Primary Master/Slave PIO
The IDE PIO (Programmed Input/Output) fields let you set a PIO mode for the
IDE devices that the onboard IDE interface supports. Modes 0 through 4
provide successively increased performance. In [Auto] mode, the system
automatically determines the best mode for each device.
IDE Primary Master/Slave UDMA
Ultra DMA 66/100 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver (W indows
ME, XP or a third-party IDE bus master driver). If your hard drive and your
system software both support Ultra DMA/66 and Ultra DMA/100, select [Auto]
to enable BIOS support.
*** On-Chip Serial ATA Setting ***
SATA Mode
This setting specifies the SATA controller operation mode.
On-Chip Serial ATA A
This setting specifies the function of the on-chip SATA controller.
[Disabled] Disable SATA controller
[Auto] Automatically determined by BIOS
[Enhanced Mode] Enable both SATA and PATA, max. 6 IDE
drives supported
[SATA Only] SATA operates in legacy mode
SATA Port Speed Settings
This setting controls the speed of the SATA port.
PATA IDE Mode / SATA Port
These settings specify the modes of the PATA & SATA ports.
Onboard Device
Press <Enter> to enter the sub-menu and the following screen appears:
Planar Ethernet 1# / Planar Ethernet 2#
These settings disable/enable the onboard Ethernet controller.
Onboard LAN1 / LAN2 Boot ROM
The items enable or disable the initialization of the onboard LAN Boot ROMs
during bootup. Selecting [Disabled] will speed up the boot process.
PCI-E Compliancy Mode
This setting specifies the compliancy mode of the PCI-Express ports (1.0 or
1.0a).
USB Controller
This setting is used to enable/disable the onboard USB controller.
9232v1.0-3.P65 2006/11/7, 下午 05:19 9