MSI MS-7549 Скачать руководство пользователя страница 43

Страница: 43 / 106

BIOS Setup

▍

MS-7549

3-7

BIOS Setup

▍

MS-7549

Devce / Vendor / Sze

It wll showng the devce nformaton that you connected to the SATA connector.

LBA/Large Mode

Ths allows you to enable or dsable the LBA Mode. Settng to Auto enables LBA

mode f the devce supports t and the devces s not already formatted wth LBA

mode dsabled.

DMA Mode

Select DMA Mode.

Hard Dsk S.M.A.R.T.

Ths allows you to actvate the S.M.A.R.T. (Self-Montorng Analyss & Reportng

Technology) capablty for the hard dsks. S.M.A.R.T s a utlty that montors your

dsk status to predct hard dsk falure. Ths gves you an opportunty to move data

from a hard dsk that s gong to fal to a safe place before the hard dsk becomes

offlne.

Important

IDE Prmary Master/ Slave , SATA1~5 & E-SATA are appearng when you connect the

HD devces to the IDE/ SATA connectors on the manboard.

▶

System Informaton

Press <Enter> to enter the sub-menu, and the followng screen appears.

Ths sub-menu shows the CPU nformaton, BIOS verson and memory status of your

system (read only).

▶

Содержание MS-7549











































































































Результаты поиска

Содержание MS-7549

Отзывы:

MSI MS-7549, Руководство пользователя, Страница: 43 / 106

Результаты поиска

Содержание MS-7549

Отзывы: