manualshive.com logo in svg

MSI MS-6728, Руководство пользователя

Поделиться
Скачать
MSI MS-6728 Скачать руководство пользователя страница 101

Introduction to Intel  ICH5R Serial ATA RAID

5 - 1 3

Install Driver in Windows XP / 2000

h

 

New Windows XP / 2000 Installation

     The following details the installation of the drivers while installing Windows XP /
2000.

1.

Start the installation:
Boot from the CD-ROM. Press F6 when the message "Press F6 if  you need
to install third party SCSI or RAID driver" appears.

2.

When the Windows XP Setup window is generated, press S to specify an
Additional Device(s).

3.

Insert the driver diskette 

Intel IAA RAID XP Driver For ICH5R (FW82801ER)

into drive A: and press <Enter>.

4.

Choose  

Intel(R) 82801ER SATA RAID Controller

 from the list that ap-

pears on Windows XP Setup screen, press the <Enter> key.

5.

Press <Enter> to continue with installation or if you need to specify any
additional devices to be installed, do so at this time. Once all devices are
specified, press <Enter> to continue with installation.

6.

From the Windows XP Setup screen, press the <Enter> key. Setup will now

load all device files and then continue the Windows XP installation.

h

  

Existing Windows XP / 2000 Driver Installation

1.

Insert the MSI CD into the CD-ROM drive.

2.

The CD will auto-run and the setup screen will appear.

3.

Under the Driver tab, click on 

Intel IAA RAID Edition

.

4.

The drivers will be automatically installed.

h

 

Confirming Windows XP / 2000 Driver Installation

1.

From Windows XP / 2000, open the 

Control Panel

 from 

My Computer

followed by the System icon.

2.

Choose the 

Hardware

 tab, then click the 

Device Manager

 tab.

3.

Click the "

+

" in front of the

 SCSI and RAID Controllers

 hardware type. The

driver 

Intel(R) 82801ER SATA RAID Controller

 should appear.

Installing Software

Содержание MS-6728































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды