background image

Step 4 : Installing Mini PCI WLAN Card

4-1 

Align the Mini PCI Card to the Mini PCI socket.

4-2 

Adjust the attached antennas and push down the Mini PCI Card gently until the 

      metal-locking levers aside from the Mini PCI socket is fastened. 

!! Mini PCI Card 

      can only fit in one direction due to the keyed notch. Wrong orientation will cause 
      improper installation and may damage the Mini PCI card or Mini PCI socket !!

4-3 

Connect the Black wire to the Main Connector.

4-4 

After connecting the black wire, connect the Gray wire to the AUX connector.

Step 3 : Installing Notebook Memory

3-1 

Align the memory module to the DIMM socket 1. 

!! Memory module can only fit in 

      one direction due to the keyed notch. Wrong orientation will cause improper 
      installation and may damage the memory modules or DIMM sockets !!

3-2 

Push down the memory module gently until the metal-locking levers aside from 

      the DIMM socket 1 is fastened.

3-3 

If you have more than one memory module, please align the 2nd memory module 

      to the DIMM socket 2. 

!! Memory module can only fit in one direction due to the 

      keyed notch. Wrong orientation will cause improper installation and may damage 
      the memory modules or DIMM sockets !! 

3-4 

Push down the memory module gently until the metal-locking levers aside from 

      the DIMM socket 2 is fastened.

p. 5

p. 6

Содержание MS-1035








Отзывы: