○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4-21
Setting BIOS Function
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Off
Leaves the computer in the power off state.
On
Leaves the computer in the power on state.
Last State
Restores the system to the status before power failure or
interrupt occurred.
PM Wake Up Events
Press <Enter> and the following sub-menu appears.
IRQ [3-7, 9-15], NMI & IRQ 8 Break Suspend
This setting enables/disables the monitoring of the specified IRQ line. If set to
Enabled
, the activity of the specified IRQ line will prevent the system from enter-
ing power saving modes or awaken it from power saving modes. Setting options:
Disabled, Enabled.
Wake Up On PME/Ring
These two fields specify whether the system will be awakened from power sav-
ings modes when activity or input signal of the specified hardware peripheral or
components is detected. Setting options:
Disabled, Enabled.
Содержание MEGA651 PC
Страница 1: ...i ...
Страница 8: ...Introduction Introducing Your Digital Media Platform ...