4-14
4.8 Integrated Peripherals
USB Controller
This setting is used to enable/disable the onboard USB host controller. Setting options:
[Disabled], [Enabled].
USB Legacy Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS. Set to
[Disabled] only if you want to use any USB device other than the USB mouse. Setting
options: [Disabled], [Enabled], [Auto].
OnBoard PATA-IDE
This setting is used to specify the P-ATA IDE interface. The settings are:
[Disabled]
Disable the P-ATA controller.
[Enalbed]
Enable the P-ATA controller.
OnBoard SATA-IDE
This setting is used to specify the S-ATA IDE interface. The settings are:
[Disabled]
Disable the S-ATA controller.
[Enalbed]
Enable the S-ATA controller.
OnBoard LAN
This setting controls the onboard LAN controller. Setting options: [Disabled], [Enabled].
OnBoard LAN Option ROM
This item enables or disables the initialization of the onboard LAN Boot ROMs during
bootup. Selecting [Disabled] will speed up the boot process.
OnBoard 1394
This setting controls the onboard 1394 device. Setting options: [Disabled], [Enabled].
Содержание MEGA mPC 800K
