MSI K9NQ Master Series Скачать руководство пользователя

Страница: 2 / 80

Copyright Notice

T he material in this doc ument is the intellec tual property of

M ICR O-STAR

INTERNATIONAL

. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

Intel

and Pentium

are registered trademarks of Intel Corporation.

AMD, Athlon

™

, Athlon

™

XP, Thoroughbred

™

, and Duron

™

are registered trade-

marks of AMD Corporation.

NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-

marks of NVIDIA Corporation in the United States and/or other countries.

PS/2 and OS

/2 are registered trademarks of International Business Machines

Corporation.

W indows

95/98/2000/NT/XP are registered trademarks of Microsoft Corporation.

Netware

is a registered trademark of Novell, Inc.

Award

is a registered trademark of Phoenix Technologies Ltd.

AMI

is a registered trademark of American Megatrends Inc.

Revision History

Revision

Revision History

Date

V1.0

First release

May 2007

Technical Support

If a problem arises with your system and no solution can be obtained from the user

’

manual, please contact your place of purchase or local distributor. Alternatively,

please try the following help resources for further guidance.

Vis i t the MSI webs ite at

http ://glob al.msi. com.tw /index. php?

func=faqIndex

for FAQ, technical guide, BIOS updates, driver updates,

and other information.

Contact our technical staff at

http://support.msi.com.tw/

9184v1.0-Preface.p65

2007/4/19,

下午

04:56

Содержание K9NQ Master Series

















































































Результаты поиска

Содержание K9NQ Master Series

Отзывы:

Похожие инструкции для K9NQ Master Series

Бренды по названию

Популярные бренды

MSI K9NQ Master Series, Руководство пользователя

Результаты поиска

Содержание K9NQ Master Series

Отзывы:

Похожие инструкции для K9NQ Master Series

Бренды по названию

Популярные бренды