MSI FX5200U-TD128, Руководство пользователя

Страница: 123 / 132

MSI Live Update 3
5-23
4. With the BIOS II, you would be able to start the system normally. After
entering the operating system (OS), set up the jumper to enter the
BIOS I mode (work mode). Now you can restore the original BIOS or
you can try to update the BIOS using the flash utility* again.
5. If the updating procedure still failed**, you may try again by repeating
Step 1 to 4. If the updating procedure is successful, that means the
BIOS data is written onto the chip successfully.
6. Replace the case and restart the computer.
MSI reminds you...
Warning: It is very dangerous to perform the proce-
dure under such condition. To ensure your safety
and prevent electric shocks and damages, please
Do NOT touch any component in the computer.
MSI reminds you...
* To update the BIOS, you must use the special flash
utility ( MSI Live Update Series ) provided by MSI only,
which can fully support the Twin-BIOS TM technology.
If the third party’s utility is used in the updating
procedure, it will erase the data in BIOS II.
** If you always encounter problems while updating
the BIOS and driver, check if the mainboard’s chipset
driver was properly installed. Please install the
chipset driver from your mainboard vendor first and
try again.