MSI E7320 Master-2S, Руководство пользователя

Страница: 23 / 92

2-7
Hardware Setup
DIMM Configuration DIMM 1 DIMM 2 DIMM 3 DIMM 4 DIMM 5 DIMM 6
1 Single Rank X X X X Single Single
1 Dual Rank X X X X Dual Dual
2 Single Ranks X X Single Single Single Single
1 Dual Rank, 1 Single Rank X X Single Single Dual Dual
2 Dual Ranks X X Dual Dual Dual Dual
3 Single Ranks Single Single Single Single Single Single
1 Dual Rank, 2 Single Ranks Single Single Single Single Dual Dual
Memory Population Rules
The mainboard supports both single- & dual-channel modes. Install at least one DIMM
module on the slots. You can install either single- or double-sided modules to meet
your own needs.
In dual-channel mode, make sure that you install memory modules
of the same type and density on DDR-II DIMMs.
Memory modules can be installed in any combination as follows:
Installing DDR-II Modules
1. The DDR-II DIMM has only one notch on the center of module. The module will
only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until
the golden finger on the memory module is deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
Volt
Notch
MSI Reminds You...
You can barely see the golden finger if the module is properly inserted
in the socket.