9 |
P a g e
Machine Solutions Inc. 2951 W. Shamrell Blvd. Flagstaff, Arizona 86005 USA
Tel: 928.556.3109
•
Fax: 928.556.3084
•
www.machinesolutions.com
Figure 4: Thermal Nozzles
Parameter Settings
Temperature
Depress and hold the up or down arrow key of the temperature controller to scroll to
the desired temperature. After 2 seconds the new value will be accepted and the
temperature will ramp to the new set point.
Heater Air Flow
Rotate the flow meter knob clockwise or counterclockwise until the meter displays the
desired value.
Pressure (210-A Only)
Rotate the regulator knob clockwise or counterclockwise until the pressure gauge
displays
the desired value.
Vacuum (210-A Only)
a.
The vacuum strength is coupled with the pressure setting. A pressure value of
80 psi will generate maximum vacuum of the system specification.
b.
With vacuum switched on, rotate the pressure regulator knob clockwise or
counterclockwise until the vacuum gauge displays the desired value.
Содержание BEAHM 160-A
Страница 1: ......
