MSI 945GCM7 series Скачать руководство пользователя страница 50

Страница: 50 / 93

3-15

BIOS Setup

Suspend Time Out (Minute)

If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off.

Power Button Function

This feature sets the function of the power button. Settings are:

[On/ Off]

The power button functions as normal power off button.

[Suspend]

W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.

Restore On AC Power Loss

This item specifies whether your system will reboot after a power failure or interrupt
occurs. Settings are:

[Off]

Always leaves the computer in the power off state.

[On]

Always leaves the computer in the power on state.

[Last State]

Restores the system to the status before power failure
or interrupt occurred.

Wakeup Event Setup

Press <Enter> and the following sub-menu appears.

Resume From S3 By USB Device

The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state.

Resume From S3 By PS/2 Keyboard

This setting determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 keyboard is detected.

Resume From S3 By PS/2 Mouse

This setting determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 mouse is detected.

Resume by PCI Device (PME#)

W hen set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event).

Resume by PCI-E Device

W hen set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PCIE device.

Resume by RTC Alarm

The field is used to enable or disable the feature of booting up the system on a
scheduled time/date.

7507v1.0-3_BIOS.p65

2007/12/7,

下午

03:25

Содержание 945GCM7 series






























































































Результаты поиска

Содержание 945GCM7 series

Отзывы:

Похожие инструкции для 945GCM7 series

Бренды по названию

Популярные бренды

MSI 945GCM7 series, Руководство пользователя

Результаты поиска

Содержание 945GCM7 series

Отзывы:

Похожие инструкции для 945GCM7 series

Бренды по названию

Популярные бренды