MZ62
-stereomicroscope user manual
www.m-shot.com
through the left eyepiece. Rotate the adjusting ring on the
left eyepiece until the image is clear. (Picture 3)
5.
Adjusting the pupil distance
Hold the left and right eyepiece tubes by hand, push and
pull the left and right eyepiece tubes in the direction shown
by the arrow in Picture 4 until it is comfortable for
binocular observation.
6.
Installing and removing the reticle
(1) Rotate the pressing ring off.
(2) Clean the cross divisional bard, fix it in the pressing
ring, with the scaled side upward.
(3) Rotate the pressing ring in the eyepiece tightly.
(4) When removing the cross divisional board, rotate the
pressing ring off from eyepiece and take out the board, and
preserve it with clean paper.
7.
Using the auxiliary objective
(1) Rotate the auxiliary objective into the microscope body
through the screw thread downward.
(2) The working distance of the 0.5x auxiliary objective lens
is large, when observing with the 0.5x auxiliary objective
lens, loosen the screw fixing the bracket with a 4mm Allen
wrench, move the bracket up one hole and fix it on the
mobile sliding seat again. (Picture 6)
(3) The above steps are unnecessary when using 0.75x
auxiliary objective.
8.
Installing the type C camera tube and digital
camera
(1) Rotate the bottom of the tube to the thread screw M28
until it
’
tight. (Picture 7)
(2) Loose the screw
②
on the tube and take the connector
③
out.
(3) Rotate the connector into the camera.
Picture 4
Picture 5
Picture 6
Picture 7
Assistant
objective