MshOt MF53-N, Руководство пользователя

Страница: 20 / 25

12
⓮Clip the fluorescent module into the module base
from the left side of the microscope, and slowly push it
along the base track to make the module clip into the
template base plate.
⓯Use a hexagon key to tighten the fixing screw on
the bottom plate of the module on the right side of
the microscope to fix the fluorescent module on the
bottom plate to avoid shaking.
⓰Loosen the side fixing screw, remove the dust
cover at the camera interface, clip the C-type CCD
adapter into the camera connection above the three
lens barrel, and tighten the side fixing screw.
Screw the camera / digital CCD into the thread above
the adapter and make sure the camera / digital CCD is
tight.
4
、
Maintenance
Cleaning of instruments
The surface of exposed lens shall not be touched by hand. The dust on it can be removed by soft brush
or gauze. If necessary, it can be wiped by using clean soft cloth, absorbent cotton lens paper, etc. dipped
Ca
m
era
/D
igit
al
CC
D
⓮
⓯
⓰