UV-02 L / UV-04 L Page 3
equipment and facility engineering
the machine, in order to avoid electric shocks.
Any unconscious start of this machine should be avoided.
When you leave the work area or the work is done, make sure the power is shut down and the
wire is unplugged.
It is not allowed to knock or crash the equipment.
It is not allowed to insert any hard object into the emitter.
Before using remove any part of the packaging.
Remove all objects in front of the emitter before starting.
Any person should keep away from the painting place for at least 4 meters.
This device should not be pointed at persons or highly flammable substances.
Do not move the machine during operations. It can lead to premature failure of the emitter.
In order to avoid overheating, do not cover the heater. The instructions shall state that the
heater must not be located immediately below a socket-outlet. The instructions for stationary
visibly glowing radiant heaters shall warn about the possible danger of installation close to
curtains and other combustible materials.
Ensure that no visitors, children or other people approach the running machine. If necessary,
provide protection devices.
Don't use the emitter, if there is no paint to be cured. Avoid emitters pointing at each other
when working.
Don’t misuse the electric wire. It is not allowed to drag the machine with the power wire or pull
the power plug. Please keep the power wire away from hot, oily or sharp or movable objects.
Please replace damaged cables and wires immediately for avoidance of electric shocks.
2.3 Electroshock Hazards
Please read, understand and follow the safety instructions below, in order to reduce the risk of
injuries and death due to electroshocks. In addition, ensure that every operator of the device follows
the safety instructions.
Do not come into physical contact with electric current!
Do not use in a damp area or come in contact with a moist or wet surface.
Do not use the device if any part of clothing or body is wet!
Avoid contact of the machine with water or moisture. If device is wet, don't plug into the
power supply!
Do not modify the power wire or plug in any way.
Do not attempt to plug the heating equipment into the power supply if the grounding prong
on power wire plug is bent over, broken off, or missing.
Do not modify any wiring, ground connections, switches, or fuses in this heating equipment.
Keep all liquid containers far enough away from the heating equipment and work area so
that if spilled, the liquid cannot possibly come in contact with any part of the equipment or
electrical circuit.
Replace any cracked or damaged parts that are insulated or act as insulators, such as power
wire, IMMEDIATELY!
Electroshocks can cause serious injuries and death!
