English
Test bench MS112
4
INTRODUCTION
We appreciate you have chosen the products of TM MSG equipment.
The present user manual consists of the information on the application, supply slip, design,
specifications and rules of usage of test bench MS112.
Prior to using the test bench MS112 (hereinafter, “the bench”), study the present user manual
thoroughly. If required, get the special training at bench manufacturer facilities.
Due to the permanent improvements of the bench, the design, supply slip and software are
subject to modifications that are not included to the present user manual. Pre-installed bench
software is subject to update. In future, its support may be terminated without a prior notice.
1. APPLICATION
The test bench MS112 is designed for diagnostics of electric AC of hybrid cars and electric vehicles.
The test bench checks any electrical compressors with built-in inverter and supply voltage from
100 to 400V (DC). The diagnosis of the compressor is carried out in a fully automatic mode, while
checking the operation of the electrical part of the compressor and testing its performance.
Nitrogen is used as a working gas for testing.
2. TECHNICAL CHARACTERISTICS
Main characteristics
Supply voltage, VAC
230
Supply type
Single-phase
Supply frequency, Hz
50/60
Power, kW
3
Dimensions (L×W×H), mm
740×600×550
Weight, kg
40
