MSC NanoServer N2-Q170, Руководство пользователя

Страница: 37 / 56

Commissioning
User Manual | NanoServer® N2-Q170
32
6.4 Connecting the power supply
You can select between two different types of power supply:

8-30 Volt DC input (wide-range), automotive

90 Watt external power supply 100 - 240 Volt AC
6.4.1 Connecting the 8-30 V DC power supply
NOTICE
Damage to the product caused by improper voltage!
The product may be destroyed or damaged when supplied with voltages higher than
30 V DC.

Connect the product only to a power source that satisfies the requirements of safe
extra low voltage (SELV).
i
We recommend using the DC power plug included in the scope of delivery (

4.1 Delivery , on page 23 ). The voltage must be in the allowed range of
30 V DC.
Before connecting the power supply, ensure that the following prerequisites are ful-
filled:

The product is connected to the protective grounding,

on page 29 .

The signal cables are connected,

on page 30 .

The monitor is connected and switched on,

on page 31 .
Selectable power
supplies
Use proper voltage!
Prerequisite