19
Version 1.0
Operating manual
SOA-1022
Figure 12 – Menu «Настройки»
If power control board is included in the System, select port (Figure 12, box 1)
of connection, and operation mode “С платой управления питания” (Figure 12,
box 2).
If power control board is not used, select operation mode “Без платы
управления питанием” (Figure 12, box 2) and set up supply voltage (Figure 12,
box 3).
Boxes 4–6 in Figure 12 display “Норма” – when voltage complies with the
preset range, or “Авария” when voltage exceeds the range.
Button “Калибровка значений” (Figure 12, position 7) is used only by the
manufacturer’s representative while providing primary settings.
To save the provided changes in “Настройки” menu, press “ОК” (Figure 12,
position 8) to return to the main screen, or “Применить” (Figure 12, position 9) to
continue operation in this menu.
To return to the main screen without saving changes – press “Отмена”
(Figure 12, position 10).
Menu «Сервис»
Use “Сервис” menu to set up date and time, and while updating software
version. Figure 13 describes this menu.
