MSA PS-203-12.5, Руководство по эксплуатации, Страница: 6 / 20

Operating manual
v.0.3 Page 6
1.3.2 To connect input power supply, use terminals
“L” and
“N”, loads – “–V” and “+V”, see Figure 2.
Figure 2 – Connection diagram of the Product
1.4 M
EASUREMENT INSTRUMENTS
,
TOOLS AND APPLIANCES
Table 3 below describes consumables required for the TS.
Table 3 – Consumables required for the TS
Name and identifier of consumables Amount of consumables Note
Cleaning cloth
0.10 kg
1 To clean the Product surfac-
es – use clean cloth
2
To remove severe contami-
nation – use cloth soaked in
alcohol
Rectified hydrolytic technical ethyl alcohol
0.05 l
To soak cloth when removing
contamination from a screen
Varnish 0.05 kg
To cover surfaces of the Prod-
uct in case of paint coating
damage
Abrasive cloth 0.06 х 0.06 m
To polish surfaces of the Prod-
uct in case of paint coating
damage
1.5 M
ARKING AND SEALING
The Product has a nameplate indicating name, serial number, date of manufac-
turing, weight, protection degree, input and output voltage, power.
The sealing of the Product is not provided.