MSA OptimAir TL PAPR, Руководство по эксплуатации

Страница: 18 / 52

(4) Grasp the outside of the cartridge, and twist and push on the spark cover. The spark
cover will snap in place.
(5) To remove the spark cover, gently squeeze the outside of the cover, twist, and pull
the spark cover off.
(6) Check the spark cover before each use to ensure no sparks have created holes or
warped the part. If holes are created or the part is warped, replace the spark cover
with a new one.
3.7 Installing the Waistbelt and Optional Shoulder Strap
3.7.1 Decon Belt with Cam Buckle
Thread the belt through the two belt loops on the back of the blower assembly.
3.7.2 Decon Belt with Side Release Buckle
(1) Note the lacing path of the belt through the male buckle.
(2) Remove the male buckle and keeper loop from the end of the belt.
(3) Thread the belt through the two belt loops on the back of the blower assembly.
(4) Replace the keeper loop and lace the male buckle back onto the belt.
3.7.3 Comfort Belt
NOTE: Adjust the belt for proper fit prior to installation.
(1) Thread the belt through the belt loop on the back of the blower assembly.
(2) Thread the belt through the loop on the back of the comfort belt.
(3) Thread the belt through the second belt loop on the back of the blower assembly.
(4) Thread the belt through the slide on the comfort belt.
3.7.4 Optional Shoulder Strap (use only with Comfort Belt)
(1) Flip the back of the buckle to open the clip.
(2) Clip one end of the shoulder strap near the back of the belt on the right side.
(3) Clip the other end of the shoulder strap near the front of the belt on the left side.
(4) Adjust the length so the waistbelt is positioned properly on the lower back.
OptimAir TL PAPR 18
US 3 Preparing the OptimAir TL PAPR for Use