MSA MultiGard 5000, Руководство пользователя

Страница: 90 / 132

82
3103-1001 Rev. 0
11.2 PC Configuration
The Modbus/BACNet gateway has a factory default IP address of 192.168.1.110 on the WAN side
connection of the router. Physically connect to the IP Router’s WAN port using a CAT5 or better
pass through cable. In order to access the gateway, a user must have IP configuration privileges on
their computer. Set the computer’s network adapter to the 192.168.1.XXX scheme with the last
octet to something other than 110. The subnet mask should be set to 255.255.255.0 and the default
gateway can be left blank.
Figure 52: Configure computer network adapter
After the computer’s network adapter has been properly configured, connect a pass through Ethernet cable from the
computer’s RJ45 network jack to the WAN side RJ45 jack on the Multigard’s internal network router.
11.2 Router Configuration
Once the computer’s network adapter has been configured and the computer is physically connected
to the Multigard router, open an Internet Explorer or Google Chrome browser. Type in
192.168.1.110:8080 into the address bar and hit enter.
Figure 53: Router WAN URL