12
Maintenance and Care
G1 PremAire® Cadet Escape
US
2.6
Installing the Strap/Bag Carrier Assembly
(1) Connect the strap/bag carrier to the shoulder strap and pull
strap hooks.
(2) Replace the regulator hose O-ring.
a) Apply a small amount of Christo-Lube to a new O-ring.
b) Carefully stretch the new O-ring onto the hose.
c) Use the O-ring removal tool to slide the O-ring into the
groove.
NOTE:
BE careful not to scratch the O-ring groove.
(3) Use an 11/16” crowfoot and inch-pound torque wrench to
connect the regulator hose and tighten to 125 +/- 25 in-lbs.
(4) Install the supply hose (See Installing the Supply Hose for
instructions).
NOTE:
The crowfoot and torque wrench must be at a right angle
to produce an accurate torque.