10
MSA Tool Tethers with Carabiners
US
5. Place the tether along the handle of
the tool, making sure the web end is
facing up.
6. Place the tape on top of the tether just
below the web end and tightly wrap
once around the tool to secure the
tether.
7. Continue wrapping by pulling and
stretching the tape tightly around the
tool, overlapping each time by at least
half an inch.
8. Firmly press the end of the tape to the
wrapped tether to seal.
9. Connect to a suitable connector and pull to ensure the tether is secure.
If using a Tool Tether Detachable Loop, connect the hook end of the side release buckle to
the insertion end of the buckle on a Tool Tether Carabiner Detachable Loop.
Содержание 10207284
Страница 6: ...6 MSA Tool Tethers with Carabiners US Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 ...
Страница 18: ...6 Longes pour outils MSA avec mousquetons CA Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 ...
Страница 30: ...6 Ataduras de herramientas MSA con mosquetones MX Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 ...
Страница 42: ...6 MSA Tool Tether Werkzeughaltegurte mit Karabiner DE Abb 1 Abb 2 Abb 3 Abb 4 Abb 5 Abb 6 ...
