Advantage 400
8
Use
MSA
GB
2.2
Filter replacement
Bayonet filters
Remove used filters and align new filters with opening on face piece and turn clockwise until the
stops are engaged.
Use of 20 P2-filter: put particle filter in cover, align cover to gas filter and click-on. To remove the
filters proceed in reverse order.
Threaded filters:
Remove used filters and thread new filters carefully. Hand tighten slowly to seal
filter.
Negative Pressure Test [inhalation]
Advantage 420
Advantage 410
(1) Cover filter opening[s] with palm[s].
(2) Inhale and hold breath for approx. 10 s.
(3) The mask is tight if no ambient air enters [facepiece should collapse slightly].
Attention!
Only use undamaged filters of the same type and class.
Always replace both filters at a time.
