PREPARING FOR USE
d. You should hear this sound reproduced in the
amplifier speaker.
e. Depress and release the on/off button again to turn
the unit OFF. The LED on the amplifier unit should
be OFF.
Facepiece Inspection (perform monthly)
1. Inspect the facepiece rubber behind the bracket for
holes or tears.
Note:
The mounting bracket must be removed from the
facepiece. Refer to P/N 10022713 for installation informa-
tion.
Storage
To store the ClearCommand Communications System
components, be sure that unit is OFF (red LED is not illu-
minated). For prolonged storage, remove the batteries to
prevent battery corrosion. Store the units in a cool, dry
place.
Installing the Batteries
In continuous service, battery life will vary depending on
user conditions. The battery is not rechargeable.
Use only 1.5 Volt Duracell MN2400 or Energizer E92
AAA alkaline batteries. Use of other batteries, or a
combination of batteries from different manufacturers,
will affect performance of the unit and will void the
intrinsic safety approval. Failure to follow this warning
can result in serious personal injury or death.
1. Loosen the thumbscrew to open battery door.
2. Insert two AAA batteries according to the battery ori-
entation noted inside the compartment door.
3. Close the battery door and tighten the thumbscrew.
Battery Disposal/Recycling
Dispose of or recycle batteries in accordance with all
applicable federal, state, and local regulations.
Do not dispose of the battery in fire. It may explode.
Failure to follow this warning can result in serious per-
sonal injury or death.
7
TAL 7001 (L) Rev 4 - 10053366
WARNING
WARNING
Содержание 10023056
Страница 4: ...NOTES 4 TAL 7001 L Rev 4 10053366 ...