MS SKY MASTER, Руководство пользователя

Страница: 4 / 28

Basic flying and Trim tuning
Ascend
Descend
Push the left stick up, the drone ascends Pull the left stick down,
the drone descends
Left spin
Right spin
Push the left stick to left, the drone spins counter-clockwise Push
the left stick to right, the drone spins clockwise
Forward
Backward
Push the right stick up, the drone flies forward Pull the right stick
down, the drone flies backward
Leftward fly
Rightward fly Push the right stick to left, the drone flies leftward Pull the right
stick to right, the drone flies rightward
Left/Right spin
trimming
When the drone drifts counter-clockwise, press right spin trim
button to tune it. When the drone drifts clockwise, press left spin
trim button to tune it.
Leftward/
Rightward
trimming When the drone drifts rightward, press the leftward trim button to
tune it. When the drone drifts leftward press the rightward trim
button to tune it.
Forward/
Backward
trimming When the drone drifts backward, press the forward trim button to
tune it. When the drone drifts forward, press the backward trim
button to tune it.
Flips and rolls
After you have the basics of flying, you’re ready to learn flip and roll your drone.
To perform a flip or roll, press the Flip button, make sure the drone is at least 3 meters off the ground and quickly
push the Rudder, in either direction to make the drone flip or roll. Once the manoeuvre is completed, steady the
drone.
Note: For the version with altitude hold function, the drone is limited to flip forward or backward only, while roll is
not working.
Headless flying
Headless mode supports beginners in the initial stages of learning how to fly the drone. Regardless of where the
drone turns, the direction of flight always corresponds exactly to the direction specified with the control for
forwards/backwards and sideways movements.
1. Place the drone on the level surface facing away from you. Turn on the drone and connect the controller.
2. Press the Headless mode button, and you will hear a beep and LED light flashes to indicate that the drone is in
Headless mode. You can press the Headless model button again to deactivate.
One Key Reverse
Press the One Key Reverse button, and you will activate it and the drone will now attempt to fly back to its initial
starting point. If you want to deactivate this mode, then push the Right control lever in any direction.