10
To adjust the default UV-light setting, simply press the button on the extreme right
("Settings") twice. You can see the screen that will follow in figure 4.
Using
the up “▲” and down “▼” you can adjust the default value of 0 minutes to the required
time. This is only possible in steps of one minute. Once you have the required time, press
once more on "Settings" to return to the start menu.
Turning on the UV-light
To turn on the UV-light, you need to hold the UV-light button down for five seconds. Figure 4
shows you what you will see on the display.
A question shows at the top of the LCD display. Using the up “▲” and down “▼” you can
switch from "N" to "Y". Choose "Y" to switch the lamp on. Then press the "UV-Light" button
once more, and the lamp will illuminate.
If you want to stop the lamp prematurely, you need to press and hold the "UV-Light" button
for 5 seconds.
It is also possible to leave the UV-light on continuously. In that case, the set time must be at
zero. When a set time is programmed, turning the UV-light on and off works in the same way
as above.
You should never turn on the UV-light when there is semen in
the storage cabinet!
Figure 4
Figure 5
Figure 6
