mru DM9600, Руководство пользователя

Страница: 40 / 57

USER MANUAL DM9600
MRU GmbH, D-74172 Neckarsulm
40 / 57
Test phase
The usability check is now active. With the „Temp “ button the tempera-
ture curve will be displayed
The temperature curve can be used to evaluate the test results. A drop
of temperature during the test phase can be the reason for a slight
pressure drop. There is no automatic temperature compensation for the
pressure.
Displaying measurement result
The start pressure, end pressure and the resulting leakage rate will be
displayed at the end of the test.
Results can be saved using the „store „button .
Storing measurement result
Results should be assigned to a site. Here you will assign your results to
a site.Results
can be saved using the „store“button . With Back, you will
reach the measurement menu.
This is the bottom part of a test result
Results can be viewed once they have been stored.
Additional parameters can be viewed using the arrows up and down
7.10. Printing measurement results
In jedem Messprogramm können mit dem Ausdruck-Button im Mess-
wertfenster / Kontextmenü die Messwerte ausgedruckt werden, die in
den Messwertfenstern 1 bis 5 zur Anzeige gebracht wurden. Doppelte
Wertanzeigen werden dabei unterdrückt.