User manual
DELTA
smart
MRU GmbH, D-74172 Neckarsulm
37 / 50
Transfer measurements to the SD card
The analyzer offers the possibility to export all stored measurements to a SD
card.
Insert SD card and select the main menu
storage
and sub menu
export CSV
(SD)
, then select
Flue gas measurements
to transfer the measurements to the
SD card.
During the data export the display reads „please wait”. A write error to SD card
is reported by the instrument. Make sure that the SD card is not write pro-
tected.
The analyzer will confirm with: Data was exported.
The data are stored as a csv-file (e.g., EMI01032.csv) on the SD card. The file-
name exists of a sequential number which fixes the device.
This file is editable on your Notebook/PC with a program like e.g. Microsoft®
EXCEL or OpenOffice® Calc. With possible problems with the using of your
computer programs please read your software documentations or ask your
software dealer.
8.6.
Data transfer to the PC (Sweeping district management pro-
grammes)
What is necessary for a data transfer to a sweeping district man-
agement programme?
The data memory can be transferred to a PC via USB. The MRU-ZIV
module is required for this.
Which requirements are necessary on the PC?
The DELTAsmart must be registered on the PC as a HID conform device.
What does the MRU-ZIV module?
The MRU-ZIV module is only used for data exchange. Via the USB cable
the stored measurements can be read in the analyzer. It is also possible
to transfer site data (site no., address, etc.) to the analyzer. The ZIV
module transfers the stored measurements to a sweeping district man-
agement programme or receives the system data from the sweeping
district management programme. The stored measurements can then
be further used in the sweeping district management programme.
How must the MRU-ZIV module be integrated into the sweeping
district management programme?
Please contact the developer of the program.
