MRMC MRMC-2118-00, Быстрый старт

Страница: 12 / 36

Round Rail Quick Start Guide
8
5. Level the new track section with a spirit level by adjusting the two
corner feet furthest from the joint (one on each rail).
6. Slide the new track section along the floor against the previous track
to firmly engage the ends of the rails. (Slide the new section — not
the previous section.) Use the matching coloured stickers as guides
to join the rails.
You might need to repeat steps 4 to 6 until you get good alignment
of the rails at the joint.
7. In order to secure the two lengths of rail together, add the 2 x clamps
on either side of the joint.
8. Use a spacer to add a third large screw in the centre of the joint to
firmly secure the two rails together.
9. On the new track section, tighten the lock nuts up against the track
on the four corner feet.
10. On the new section, lower the six middle feet until they touch the
ground (finger tight against the ground) and then tighten the lock
nuts on them.
Clamp
Spacer