MRMC MRMC-2092-00, Быстрый старт

Страница: 15 / 32

TX90L Model Mover Quick Start Guide
11
3. Power up the Flair computer system and all of its components,
including the RT-14 interface box. You can do this while the robot is
powering up (step 2).
Do not start the Flair application yet .
4. After the robot has finished powering up (step 2), the cifX board in
the Flair PC display two steady lights and one blinking light (see
diagram above).
If the cifX board lights do not show as above after about three
minutes, then close Flair and restart INtime as follows:
4.1 In the Windows Taskbar, right-click the INtime icon.
Hint
When the power-up sequence has completed, the Stäubli CS8
shows an “
A ” on its display.
“
A
”
2
4
Steady
Blinking
cifX board