MRMC MRMC-1488-00, Быстрый старт

Страница: 22 / 52

AFC (MHC) Quick Start Guide
18
AFC (MHC) Quick Start Guide AFC (MHC) Quick Start Guide
Appendix 1 Troubleshooting
Typical symptoms, causes, and actions
Working with Local Area Networks
The MHC on the PC and the head communicate with each other through
an Ethernet Local Area Network (LAN). The PC and head are
devices on
the network. Under certain circumstances you might need to change the
Symptoms Cause and/or action
The head does not
move
The head does not
appear connected in
MHC
The head is not been able to load in MHC.
Check that all cables are connected, and all
devices have power.
If you have connected more than one head,
connected the MRMC system to another local
network, or moved the controller and head
between networks, check that correct LAN
addresses have been entered in MHC.
Check the order in which the devices are
powering up. If two devices on the network try
to power up and initialise their Ethernet
connection at the same time, the devices can
conflict with each other on the network. Avoid
powering the head from the power output
socket on the joystick, in order to avoid
powering them up simultaneously. Use an
independent power source for each, and
connect the joystick to the PC after powering
up the head.
Controls move in the
wrong direction Change the working direction of the controls
to your preference (page 15).
Limits are being
ignored or causing the
head to oscillate when
reached. The axes have not been zeroed. You must do
this at the beginning of each session just after
you load the head (page 15).