MRMC MRMC-1120-02, Быстрый старт

Страница: 6 / 20

Quad Box Quick Start Guide
2
Quad box connector summary
1-4. #1 - #4 identical connectors for any stepper motors, such as PAN
and TILT in the head, track motors, and external Lens Control
Motors. For pin-out information see Stepper motor connector on page
4.
5. POWER 18-36V connector, for power input for the head.
When the power is on, the LED next to the POWER
connector lights up. For pin-out information see Power
18-36 Volts connector on page 4.
6. DATA connector. This is a Serial RS232 connector, for connection to
a controller using a Serial RS232 connection (as an alternative to an
Ethernet connection), and for updating the firmware in the Quad
box. For pin-out information see
Serial RS232 connector on page 4.
1 2 3 4
5 6 7
Quad box front
8
Quad box rear:
Power
LED