MREL STRATACAM, Руководство по эксплуатации

Страница: 26 / 30

S t r a t a C a m ™ M i n i O p e r a t i o n s M a n u a l - E d i t i o n 1 . 0
22
The Depth Counter Is Inaccurate
This can happen when the cable is not going directly over the roller of the Encoder, directly down the Borehole. If you have a tripod over
the hole and the cable is running downhill to the tripod, or even at a flat angle, it’s possible that the cable will slip as it contacts the roller
(where the encoder is for the depth counter). You can eliminate that slippage by installing the encoder so that the cable is running uphill to
the encoder from the
StrataCam™ Mini Cable Unit .
StrataCam™ Mini Battery (optional) Voltage Too Low
This is the number one cause of problems with the system. Always keep your StrataCam™ Mini Battery fully charged and make a habit of
returning it to AC power for charging after each use. The lead-acid battery shoul be connected to the battery charger supplied when not
in use.
Problem Not Found?
If you have a problem that is not outlined in this section, please review each section of this manual and follow all instructions for the
beginning. If the problem still persists, please contact
MREL Group of Companies Limited . Our contact information is in Chapter 6.
5.1 Troubleshooting