Fan Diagram & Installation
Page 5
mrcool.com
2
Fan Loop Installation to Base
1.
Align the fan loop vertically with the fan base. Make sure to also align the triangle mark, found on the silver
portion of the fan loop, to the unlock symbol of the fan base. There will be tabs on the bottom of the fan loop
that will allow it to slide into the fan base. (
Refer to Fig. 2.1 & Fig. 2.2
).
2.
Now, rotate the fan loop clockwise until the triangle mark is above the lock symbol, to lock it to the base.
NOTE:
Use these same steps in reverse (rotating the fan loop counter-clockwise to unlock it from the base)
to access and replace the filter when needed.
Triangle Mark
Air Loop
Base
Lock
Unlock
Lock mark
Fig. 2.1
Fig. 2.2
Filter