EN-21
10.2 Setting the alarm limit value
(ALARM)-2
The alarm limit value is used to monitor
the display value automatically. It controls
the alarm indication function. The alarm
limit value can be edited in the displayed
V/m unit. The ALARM setting range is
from 0.001 to 999.9V/m. ALARM default is
set at 999.9V/m.
Alarm limit function is only used for total
three axial value Comparator.
Press hold “
” key first and “
”
key to enter the Setup Mode.
Press “
”key again to enter the alarm
setting mode.
Press “
” key to move decimal.
Press “
” key to select the desired
setting value.
Press “
”key and “
” key to
change digit.