Sheer Brilliance N Gauge
Steam Sound Decoder with
19 Accessory Sound Functions
Item #0001637
Thank you for purchasing our highly advanced DCC locomo-
tive sound decoder. Combined with any DCC System, our
new decoder with authentic steam sound truly will make your
model railroad come to life.
•
Synchronized steam chuff with random sounds
•
12 selectable chuff sounds (4 regular/ 4 articulated)
•
User selectable 12 different whistles and 4 bells
•
19 accessory functions allowing more sound control
than ever
•
Programmable individual sound volumes
•
1.0 amp capacity
•
Programmable for either 2-digit (1-127) or 4-digit
(1-9999) addresses
•
Programmable start voltage
•
Programmable acceleration rate
•
Programmable deceleration rate
•
Programmable top voltage
•
Programmable 14, 28, 128 speed steps
•
Selectable factory default speed curve
•
Directional lighting control for front and rear lights at
0.2 amp rate.
•
Programmable chuff rate and chuff starting point
•
Supports advanced consisting (CV19)
•
Supports programming on the main, (Ops mode)
•
Compatible with NMRA DCC standard
•
Complies with the part 15 of FCC
•
17mm speaker included
•
Dimensions: 30.0mm x 10.0mm x 5.0mm
TROUBLE SHOOTING
This sound decoder should perform well with all DCC systems. See your DCC
system manual to learn how to program and operate the decoder. For more
information about register/CVs and their functions, please refer to the NMRA DCC
Standard & Recommended practices, RP-9.2.2 this is available directly from the
NMRA or their website at
www.nmra.org.
Due to the nature of all sound decoders, the CV read back may not work.
Whenever the decoder doesn’t work it may lose its address. Please use program
track to re-program the loco address or program CV# 125 with value 1 to restore
the decoder to factory setting. This should bring the decoder to life.
FCC COMPLIANCE
This device complies with the part 15 of FCC rule. Operation is subject to the
following two conditions. (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
cause undesired operation.
RETURN PROCEDURE
If it should become necessary to return your decoder, unplug the decoder and
return the decoder only. Please include a letter (printed clearly) with your name,
address, a daytime telephone number, and a detailed description of the problem
you are experiencing. Please also include a $15.00 check for shipping and
handling.
Be certain to return only the decoder.
Send the decoder to:
Model Rectifier Corporation
Attn: Parts & Service
80 Newfield Avenue
Edison, NJ 08837-3817 U.S.A
PROGRAMMING FOR DCC OPERATION – DIGITAL MODE
This decoder supports all program methods including register, paged mode,
direct CV programming, and programming on the main (OPS mode)
2005 MODEL RECTIFIER CORPORATION
80 NEWFIELD AVENUE
EDISON, NJ 08837-3817
Printed in USA
Speed curve of different value of CV #124
Output
CV #124 =1
CV #124 =2
CV #124 = 0, Linear
CV
Register
Description
Range
Default
CV1
R1
Short address
1-127
3
CV2
R2
Start voltage
0-32
0
CV3
R3
Acceleration
0-32
0
CV4
R4
Deceleration
0-32
0
CV5
---
Top voltage
0-32
32
---
R6
Page num ber
---
---
CV29
R5
Basic configuration
---
2
CV7
R7
Manufacturer version num ber
---
32
CV8
R8
Manufacturer ID
---
143
CV17
---
Long address upper byte
192-231
192
CV18
---
Long address lower byte
0-255
3
CV19
---
Advanced consist address
0-127
0
CV49
Sound on/off (1=on)
0-1
1
CV50
---
Whistle type
0-11
3
CV51
---
Whistle volum e
0-3
3
CV52
---
Bell type
0-3
3
CV53
---
Bell volum e
0-3
3
CV54
---
Bell ring rate
0-50
3
CV55
---
Chuff type(0-5=single chuff, 8-12=double
chuff)
0-12
0
CV56
---
Chuff volum e
0-3
3
CV57
---
Brake squeal volum e
0-3
3
CV58
---
Air release volum e
0-3
3
CV59
---
Blower hiss volum e
0-3
3
CV60
---
Random noise volum e
0-3
3
CV61
---
Injector volum e
0-3
3
CV62
---
Coupling volum e
0-3
3
CV63
---
Air pum p type
0-3
0
CV64
---
Air pum p volum e
0-3
3
CV105
---
User identification num ber
0-255
0
CV106
---
User identification num ber
0-255
0
CV112
---
Conductor volum e
0-3
3
CV115
---
Auto brake squeal enable/disable
0-1
1(enable)
CV116
coupling sound type
0,2,3
3
CV118
---
Shoveling volum e
0-3
3
CV119
---
Coupling fire volum e
0-3
3
CV120
---
Chuff rate
0-30
---
CV121
---
Chuff start point
0-5
---
CV124
Speed curve select(0=linear, 1=slow increase
at slow speed, 2=fast increase at slow speed)
0-2
0
CV125
---
Factory default setting, program it to1
will
restore all the CV to def ault settng
---
0
CV21
---
0
When CV21=0, all accessory function
will
follow its ow
n
address. When CV21=1, all
functions
will
follow the consist address
0-1
