MRC RL-1250, Руководство по эксплуатации, Страница: 4 / 6

7. The choosing of propellers & stirring vessels depend on the temper of the materials (For
example, consistency, viscosity, etc.)
8. Using more than 2 propellers at the same time is acceptable but need depend on the
torque of the machine.
V
、
ASSEMBLING
1. Place pole onto the stand base, and lock the screw nut.
2. Insert the flat end of pole into the stirrer body, then lock the hatless screw tightly, and
fasten in the holder slot.
3. Set the machine body and adjust the altitude to prepare the placement of stirring shaft.
4. Put the propeller on the flat side of screw, then fix it on one end of shaft.
5. Turn left to open the holder, get stirring shaft into the hole, then fasten it.
VI
、
CAUTION
1. Avoid using the same source with other electrical appliances.
2. Please assure the fan working.
3. The overload burden will exhaust and damage the gear, so it’s necessary that using
depends on the specifications.
VII
、
INSPECTION
1. the fuse burned out or not
2. the function key worked normally or not
3. the error message were disappeared after re-turning on.
*If everything is okay but the error message is still appeared, please send it back to the
agent for doing examination & maintenance.
3