Remark :
* When adjust the value, the " SV indicator " ( 3-3, Fig. 1 )
will light.
* The function of " Pulse no. per round setting ", refer to page 6, 7.
Roller diameter value setting
1)After set the " Pulse no. per round ", press the
" Set Button " ( 3-4, Fig. 1 ) twice, the " Display "
will show dIA ", now the meter is ready for the
the " Roller diameter value " setting.
2)Use the " Button " ( 3-5, Fig. 1 ) and the "
▼
▲
Button " ( 3-6, Fig. 1 ) to adjust the desiring
" Roller diameter value " in the unit of cm.
* When adjust the value, the " SV indicator " ( 3-3, Fig. 1 )
will light.
* The function of " Roller diameter value setting ", refer to page 7.
Control Hysteresis value setting
1)After set the " Roller diameter value ", press the
" Set Button " ( 3-4, Fig. 1 ) twice, the " Display "
will show CtHy ", now the meter is ready for the
" Control Hysteresis value " setting.
2)Use the " Button " ( 3-5, Fig. 1 ) and the "
▼
▲
Button " ( 3-6, Fig. 1 ) to adjust the desiring
" Control Hysteresis value ".
Remark :
* When adjust the " Control Hysteresis value " , the " SV indicator "
( 3-3, Fig. 1 ) will light.
* The function of " Control Hysteresis value " setting, refer to
page 12, Fig. 3.
11