3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
com
.
mrclab
@
mrc
Section 3
Unpacking and Installation
Upon receiving the instrument, check to ensure that no damage has
occurred during shipment. It is important that any damage that
occurred during shipment must be detected before unpacking. If
such damage is found, notify the carrier immediately.
After unpacking, check to ensure that all the following parts and
accessories are included in the package. If not, contact your dealer or
MRC immediately.
Item
Quantity
Main Body
1
Operation Manual
1
External Probe
1
Stirring magnet (option)
1
Support Rod (option)
1
RS232 or RS485 Communication (option)
1
Programmer (option)
1
Separate Control box (option)
1
Installation Environment
It should be installed in suitable environment as described below.
Avoid direct sunlight.
Room temperature should be 5°C ~ 40°C
Relative Humidity (RH%) should be less 80%.
Altitude should be less than 2,000m.
