MRC IR-CAM-B-70, Руководство по эксплуатации

Страница: 35 / 89

28
Press or once to change Isothermal Temp 0.1 . Long press or
will change Isothermal Temp in 1 interval.
Isotherm Width
Adjust Isothermal Width to change the range of Isothermal Color display.
Press or once to change Isothermal Width 0.1 . Long press or
will change Isothermal Width in 1 interval. Default setting is 1.0 .
Hot Superposition
Overlay infrared image partly on visual image, which is convenient to
identify and analyze infrared image.
There are 3 modes to setup target area to infrared image, the other area to
visual image.
Press or button to select Above, Below, Interval of thermal
superposition.
Interval: If select Interval type, it is necessary to set the upper limit
of interval and lower limit of interval; Press or to change 0.1 ,
Long press or to change in 1 interval.
Infrared image overlays visual image between two specified
temperature.
Above: if select Above type, it shall adjust above temperature level;
Press or to change 0.1 , Long press or to change
in 1 interval.
Infrared image overlays visual image above specified temperature.