MRC HU-24 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 33

MRC HU-24 Скачать руководство пользователя страница 33

33

WARRANTY

MRC

warrants to the original first customer that the products will be free from defects

in material and workmanship for only the period of 12 months from the date of
delivery from the

MRC

factory.

If any

MRC

product is proven to be defective in the material or workmanship by

MRC

during above applicable warranty period,

MRC

only will repair or supply replacement

for the defective product at free of charge. And only after having informed by

MRC

, the

customer can return the defective parts to

MRC

without any charge, the costs for

transport of the parts to be repaired shall be borne by

MRC

.

In case of replaced or repaired the goods, the original warranty period shall be
kept.

MRC

shall not be liable for under any circumstance:

1. If all actions described in

MRC

’s installation and operation manuals do not carry

out even by well trained and sufficiently qualified personnel authorized by the owner.

2. If the customer do not follow

MRC

’s installation and operation manuals.

3. If the products have been modified, or altered without written agreement with

MRC

.

4. Under circumstances of any direct, indirect, incidental, consequential damages, or

damages for injury occurrence to person or property, loss of business or information,
loss of profit or production interruption in relation to the manufacture or use of the
products.

5. Any damage or malfunction due to act of providence such as earthquakes or fires.
6. Any damage or malfunction during transportation or transfer such as dropping the

product after the purchase.

7. Any damage or malfunction caused by other source not directly caused by

MRC

products.

8. Any damages or malfunctions caused by mishandling or unauthorized repairing jobs.
9. The oscillators for the Ultrasonic Humidifiers.
The sheathed heater for Resistive Steam Humidifiers.
PTC (Positive Temperature Coefficient) heater for Steam Humidifiers.

MRC

shall not be liable for any cost or expense whatever either direct or indirect costs

for removal, re-installation for any defective product and installation for the
replacement.

By purchasing

MRC

products, the purchaser understands and agrees the terms and

conditions of this warranty.

«
...
31
32
33

Содержание HU-24


































Отзывы:

Нет отзывов