BELT INSPECTION AND REPLACEMENT:
Inspect belt periodically and replace if actually broken or if the cords are
exposed or frayed. Small outer fabric breaks are not harmful.
Removal of the drive belt may require the adjustment or removal of the motor
and/or the large drive pulley. Installation of a new belt is as follows:
1. Unplug unit to avoid shock and/or electrical component damage.
2. Remove the left side panel to expose the motor and other components.
3. Take note or mark the location of the motor along the adjustable slots in
base plate.
4. Loosen the socket (“allen”) screws that fasten the motor to the base
plate.
5. Slide the motor towards the large pulley to allow the belt to slacken.
6. Remove belt and install new belt with identical number of teeth.
7. Adjust tension on belt.
Note:
cogged style belt does not need excessive
tension.
FUSE REPLACEMENT:
Replacement fuses for the unit are (2) 3 Amp Slow Blow (Time Delay).
Replace fuses only once. Preventative maintenance has set the fuse to blow
if the motor is over worked. The problem is generally in extreme wear of the
bearings or an object obstructing the shaking action.
NOTE: If replacement fuse blows almost immediately, repairs may be
necessary.
If you have any doubts or inquiries concerning operation contact your supplier or
MRC
technical service.