temperature higher than setting tempe return difference temperature,The
replay will start refrigeration
Sensor failure alarm
：
When sensor plough,LED glittering and show
“
E1
”，
Alarm with buzzer.
；
When sensor short curcuit, LED glittering and show
“
E2
”，
Alarm with buzzer.
Exceed temperature range alarm
：
When sensor temperature more than+99 or less than -50
，
Will
show“HH”or“LL”
。
Press
more than 2seconds,Temperature control system close.
4
Defrost
●
Unused
●
Maintenance
4.1
Defrost
1.There will be some frost on the surfaces of chamber for a long time running which may
decrease the performance of freezer. If the thickness of frost is more than 10mm, some defrost
operations are recommended.
2.Cut off the power, Open the door,and move the goods to shade.
3. Use shovel to clean the surface frost.
4.To quicken the process of defrost,You can put the 50 water container in the freezer.
5.
Note
：
Any electric heater, metal tool or edge tool CAN NOT be used during defrost operation.
6.Then to clean the water with dry cloth, Block the drain lid.
7.
Connect the power supply after defrost is completed to run your freezer.
8.To put the goods in the freezer after finish all steps.
4.2
Maintenance
1 Can not put the heavy goods in the freezer, prevent to press the body.
2 Should clean the freezer at regular times.(for safe,please draw the power pin at first)
3.Use the soft and warm cloth to clean the freezer surface and inner.
4 If dirty serious,Please use the scour to wipe,then clean with soft cloth.
5..Once the freezer running,The best continuous to use.
①
DO NOT sprinkle water on the faces of cabinets, which may decrease insulating
property of electric parts and rust metal parts.
DO NOT use hot water, corrosive cleanser and organic solvent!
Note
：
Prohibit the children to playing games around the freezer.
