15
case of coating damaged.
4
）
The liquid storage tank must be dried after cleaning in case of pollute the bath fluid when
using it next time.
5
）
Please check the equipment connection pipe regularly, if found aging or damage, please
replace it according to original specifications.
6.2
Maintenance of Cooling System
In order to maintain the refrigeration effect, please clean up the cooling system (condenser)
regularly. Please follow the steps below:
1
）
Turn-off the power supply.
2
）
Take down the screws then pull the side panel down.
3
）
Clean up the dust on the condenser fin (Suggest to use cleaner or soft brush to clean it
along the direction of the rib.
Condenser
Condenser fin
Figure 6.2
Note:
Do not touch condenser fin in case of injure hands!
4
）
After cleared, install the side panels in place.
6.3
Maintenance Requirement
1
）
Equipment maintenance must be done by the professional technical personnel or the
company authorized maintenance personnel.
