MRC CD-4309, Руководство по эксплуатации, Страница: 20 / 24

8-4 Select the Temp. unit to
℃
℃ ℃
℃
or
℉
℉ ℉
℉
When the lower display show " T CF "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) to select the upper Display text to " C " or " F ".
C - Temperature unit is ℃ ℃ ℃ ℃
F - Temperature unit is
℉
℉ ℉
℉
2) After Display unit is selected to " C " or " F ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
8-5 Set CD temperature compensation factor
When the lower display show " PCNT "
1) This function only for the Conductivity ( PCNT ) mode of
adjusting the probe's Temp.compensation value in
%/per
℃ unit. The default value is 2 %/ per ℃ .
2) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) to select the upper value to the desired
Temp. compensation value ( %/per
℃
), then press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
value temporally.
8-6 CELL K Value setting
When the display show " CELL "
When the Display show the text " CELL ", Use the
"
▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button " ( 3-6, Fig. 1 ) Adjustment
CELL(Probe) K Value setting, than press the " Enter Button "
( 3-8, Fig. 1 ) will save the setting.
18