I N S T A L L A T I O N M A N U A L
F 6 5 0 / 8 0 0 G S
MRA-Klement GmbH + Siemens Str. 6 + D-79331 Teningen
Tel.: +49 7663 9389 0 + Email: [email protected]
Thank you for buying a MRA Windshield.
Read this manual carefully and check the parts list for completeness before you begin. We recommend that you have
your screen fitted by an authorised workshop.
Parts List:
Required Tools:
1x Screen
6x Black screws M 5 x 16
2x Black screws M 5 x 20
8x Plastic washers
2x Rubber nuts
2x Metal brackets
Allen key 3mm
Torx 25
Installing your screen :
Stand your motorbike on a level, firm surface.
Remove the six screws and the original screen.
NOTE:
the
washers in the rubber nuts might fall out.
Mount the metal brackets with the screws, plastic
washers and rubber nuts, and align them (Fig. 1).
Position the new fairing screen onto your motorbike;
first, fasten it with the medium M5 x 20 screws, then
those on the metal bracket and then the outer screws,
each with the plastic washers (Fig. 2).
Tighten up all of the screws, and make sure they are still
tight from time to time.
P1
P2
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at regular intervals.
Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or spirits to clean the screen as
they will damage it.
© by MRA-Klement GmbH – 08/2011
