mr.steam
®
Installation, Operation & Maintenance Manual
_________________________________________________________________________
I
N
S
T
A
L
L
E
R
4
If acrylic, fiberglass or other non-heat resistant mate-
rials are used as part of the steam room enclosure. Consult with the
material manufacture and see pg. 9, “Installing the Steamhead" for
additional details.
IMPORTANT NOTES:
This document contains important safety, operation and maintenance
information. Leave this document with the homeowner. Do not dis-
card this document.
The following general information should be used in conjunction with
consultations with an architect, designer and contractor in determin-
ing factors necessary in providing a suitable and safe steam room.
MrSteam steam generators are intended to be operated with
MrSteam iSteam
®
, AirTempo
®
, iTempo/Plus
®
, iTempo
®
Home Wizard
®
and iGenie
®
controls only, and are to be installed strictly in accor-
dance with the specific instructions contained in this manual and as
supplied in the manuals provided with the controls or accessories.
Never use damaged equipment, doing so may
result in an inoperative or hazardous installation.
• Discontinue use of the steam generator and control if the steam
generator or control are damaged or otherwise not functioning
properly. Doing so may result in an inoperative or hazardous
installation
• ELECTRICAL SHOCK HAZARD. MrSteam steam generators are
connected to 208V or 240V line voltage and contain live electri-
cal components. All installation and service to be performed by
qualified and licensed electricians and plumbers only. Installation
or service by unqualified persons or failure to use MrSteam parts
may result in property damage or in a hazardous condition.
• The MS series of steam generators are for residential use only.
Commercial or other nonresidential applications void the warran-
ty and may adversely affect product performance and may repre-
sent a safety hazard.
The
peel
and
stick
warning
label
located
in
this
manual
is
an
essential
part
of
providing
a
safe
environment
for
steam
room
users.
The
peel
and
stick
warning
label
must
be
applied
to
the
wall
of
the
shower
or
steam
enclosure,
at
a
point
that
is
visible
to
all
users.
Failure
to
install
this
sticker
may
result
in
serious
injury
or
death.
The
location
where
this
owner's
manual
is
kept
shall
be
written
in
the
space
provided
on
the
label
using
per-
manent
ink.
For
a
replacement
warning
label
contact
MrSteam
customer
service
at
1-800-76-STEAM
or
BEFORE INSTALLING
Carefully inspect the Steam Generator and packaging for
shipping damage. In the event of shipping damage,
please contact the carrier for claim information. Our
customer service department can assist you with any
missing or damaged parts.
Read these instructions before installation or service.
Although this MS steambath generator has been fully quali-
fied for shipment by MrSteam
®
, the following must be
reviewed for proper, safe and enjoyable steam bathing:
1. Verify that the model and accessories specifications are
correct for the incoming line voltage.
2. Insure steambath generator has been correctly sized for
the steambath room. Pay particular attention to room
STEAM ROOM GUIDELINES
1.
Steam
room
must
be
completely
enclosed,
with
full
walls,
door,
floor
and
ceiling.
2.
It
is
recommended
that
a
gasketed
door
is
used
for
steam
containment.
3.
To prevent slip and fall hazards, non-slip
flooring or non-slip floor strips must be installed in the
steam room.
4.
Check
the
suitability
of
any
materials
with
the
manufacturer.
Walls
and
ceilings
must
be
constructed
of
water-resistant,
non-corrosive
surface,
such
as
tile,
marble,
molded
acrylic,
or
other
non-porous
material.
5.
The
ceiling
should
be
sloped
to
prevent
dripping
of
condensate.
6.
Provide
a
floor
drain.
7.
No
heating,
venting
or
air
conditioning
devices
should
be
installed
inside
the
steam
room.
8.
Steam
room
tile
construction
information
is
available
from
the
Tile
Council
of
America,
Inc.
by
purchasing
the
TCA
Handbook
for
Ceramic
Tile
Installation.
Tel.
(864)
646-8453
or
www.tileusa.com.
9.
Windows
that
are
part
of
the
steam
room
should
be
double
paned
and
tempered
safety
glass.
10.
Limit
steam
room
ceiling
height
to
8
feet.
Exceeding
8
feet
may
require
a
higher-rated
steam
generator.
volume
and
construction.
If
any
questions,
please
refer
to
MrSteam
sizing
and
selection
guide
on
page
3.
3.
Marble
or
glass
walls
or
ceilings.
“ENLARGE”
the
room’s
size,
requiring
a
generator
larger
than
one
based
only
on
the
room’s
cubic
foot
(L
x
H
x
W)
volume.
4.
The
physical
size
of
the
unit,
clearance
for
plumbing
servicing,
and
its
distance
from
the
steam
room
must
all
be
considered
before
final
installation.
5.
Consider
any
controls
and
accessories
before
initiating
installation.
Read
the
Installation
and
Operation
Manual
of
all
controls
and
accessories
available
at
www.mrsteam.com
technical
downloads.
6.
Record
the
serial
number
of
the
steam
generator
in
the
space
provided
in
the
table
of
contents
of
this
manual.
REDUCE THE RISK OF OVERHEATING AND SCALDING
1. EXIT IMMEDIATELY IF UNCOMFORTABLE, DIZZY OR SLEEPY.
STAYING TOO LONG IN A HEATED AREA IS CAPABLE OF CAUSING OVERHEATING.
2. SUPERVISE CHILDREN AT ALL TIMES.
3. CHECK WITH A DOCTOR BEFORE USE IF PREGNANT, DIABETIC, IN POOR HEALTH
OR UNDER MEDICAL CARE.
4. BREATHING HEATED AIR IN CONJUNCTION WITH CONSUMPTION OF ALCOHOL,
DRUGS, OR MEDICATION IS CAPABLE OF CAUSING UNCONSCIOUSNESS.
5. DO NOT CONTACT STEAM HEAD OR STEAM AT THE STEAM HEAD.
REDUCE THE RISK OF SLIPPING AND FALL INJURY
1. USE CARE WHEN ENTERING OR EXITING THE STEAM ROOM. FLOOR MAY BE SLIPPERY
NOTE: FOR ADDITIONAL SAFETY CONSIDERATIONS SEE OWNER”S MANUAL
WHICH IS KEPT:_______________________________________
THE OWNER’S MANUAL CAN BE FOUND AT WWW.MRSTEAM.COM
USE OF STEAM ROOM IN CONJUNCTION WITH CONSUMPTION OF ALCOHOL CAN BE
DANGEROUS AND CAN RESULT IN INJURY THROUGH SLIP AND FALL OR OTHERWISE.
mr
.
steam
®
43-20 34th Street , Long Island City NY 11101 1 800 76 STEAM www.mrsteam.com
PUR100378 8.18
WARNING
!
Not Actual Size