User Manual R7
Operation instruction
13
13
C) Setting time of flushing spittoon according to times of pressing buttons,one pressing to a sound
Pressing times
Buzzer sound
LED Flash
Flushing time
1 times
1 sound
1 times
3 minutes
2 times
2 sound
2 times
15 minutes
3 times
3 sound
3 times
30 minutes
4 times
4 sound
4 times
No time limited
D)Press the setting button again,the buzzer sound again,this signal light turns down,that means that the time of
flushing spittoon is remembered by machine.
8.3 Seat rising up:Pressing this button to rese the seat up,stop pressing to stop rising
8.4 Seat getting down:Press this button to get seat down,stop pressing to stop getting down.
8.5 Backrest rising up:Press this button to rise backrest up,stop press to stop rising.
8.6 Backrest getting down:Press this button to get the backrest down,stop pressing to stop getting it dow.
8.7 Instrument tray rising up: Press this button to rise up the instrument tray,stop pressing to stop rising.(The
function only for R7+/R7+CART/R7 implant)
8.8 Insturment tray getting down:Press this button to lower the instrument tray.stop pressing to stop
lowering.(The function only for R7+/R7+CART/R7 implant)
8.9 Patient chair initial pose: Press this button,the backrest rise and the seat get down to lowest, motor can only
during its limited.
8.10 Shock position:Press this button
，
the backrest will lay down to lowest(-5
°
) but the seat rise to the top.
8.11 Comprehensive key for flushing,lighting down and Chair pose recovery
：
Press this button,backrest rises to
top,and the seat does as well, and the light turns down, spittoon is being flushing
8.12 Chair position for patient’s spitting: Press this button, backrest rise to top, dental lamp turns off
meanwhile,and water is flushing the spittoon, press again,return to original treatmeant pose,light up and stop
flushing.( this function only for X3 and X3+)
8.13 Setting button :the button for preparing to set parameter of other function,press this button again mean to
lock the parameter.
8.14 Heating: this button is for control of heating water,it owns the protection system of over heating.and the the
temperature is set before delivery to user.
Notice
Heating button of R7: the heating button of the assistant control panel control the heater in the main machine
Notice
A)Put 500mg/L of disinfectant liquid including chlorine and turn on the master air switch before setting.
B)Disinfection time can be set for 0 to 60 seconds.
C)You can skip over this setting step if you do not need this function,or turn on the air master switch sown
the main box.
Notice
The time of flushing spittoon can be set according to setp A),C),D).
